Water blasting machine Water blasting machine

Water blasting machine

Water blasting machine adopts pressure stream to achieve cleaning the surface of the material like cleaning the insider of the tube ,pipe or the old paint and rust removal .It is driven by diesel engine or electrical motor .

Water blasting machine can be used for cleaning the old paint and rust for the ship and remove the oyster and alga for the shipyard to instead of the sand blasting . It also can be used for tank ,tube ,pipe insider cleaning .


Water blasting machine is engineered by electrical motor or diesel engine with ultra high pressure water for surface preparation. And achieve cleaning solution according to clients need .New 4 mm thickness stainless steel tank and triple filter system helps extend water blasting machine running life.

With a skid or trailer unit. Watex diesel water blasting machine offer a host of features to provide contractors with enhanced performance, superior durability.

Ultra high pressure (UHP) water blasting machine deliver a host of engineered improvements. One of the most notable changes is driven system . Integrated design of the whole of the chassis helps extend system life and keep the stability of the whole of the water jet unit as well .

All operating system including the pressure valve and pressure gauge with snubber. It mounted on a separate accessory manifold, which provides additional protection for these important components.

Powerful performance and undeniable reliability are just two reasons the new high pressure waterblasting equipment is the clear choice for your high-flow applications.

With operating pressures from 1000 bar to 3000 bar, it is ideally suited for a wide variety of cleaning work. In the chemical and mining industry and popular in the paint removal industry for the big ship. water jet blaster will be best choose .

Besides ,HP sealing made by super composite material enables high durability of the high pressure seals and counteracts the ingress of air.

Ultra High Pressure Water Jet Blasting Equipment Pump Unit

Three pistons to five pistons type keep the stability of the running

Chang various pressures flexible with accelerating speed

Diesel engine driven pump ensure the fluid end receives water at the correct pressure

With the continuous working pressure from 1000 bar to 3000 bar with different flow rate combing varies cleaning head for tube cleaning with big flow rate and paint rust removal and cement jetting with ultra high pressure .

1) Ultra High Pressure Water Jet Blasting Machine Anti Vibration Technology

Water jet unit anti vibration technology reduces vibration during running by 30% allowing less movement and greater control of the end hose.

One button stabilization technology quickly dampens any pump movement resulting from repositioning the plunger. This allows precise positioning of the end hose with the fluid end .

With cycle times of up to 1900 per minute (at 2780bar /40000psi). Pump efficiency is increased up to 25% while diesel consumption is decreased by up to 10%.

  • By adopting our new swing brake tech, the pump’s overswing amplitude is reduced by 70%
  • The gear box and fluid end developed by an international team ensures precise operation and energy consumpition
  • Extra reinforcements in the boom, plunger, fluid end and undercarriage increase stability and service life
  • Easily accessible service points and a detachable fluid end that make maintenance more easy
Water blasting machine

Versatile And Easy Control Panel For Ultra High Pressure Water Jet machine

Control system ensure the high stability of the flow rate and continuous water jetting and guarantee high volumetric efficiencies at high pressures in a quick speed as well.

It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%

Water blasting machine

1) Watex Fault Self Diagostic Technology For Water jet blasting machine

Continually monitors more than 100 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Different pressure alarm when it take it’s limit
  • Oil pressure alarm when high
  • Oil temperature alarm when high
  • Water pressure switch to keep the pressure of the water into the pump is eligible

All Of The Electrical Component Parts Purchased From Schneider For Water Jet Unit

  • All of the electrical components adopts Schneider. And some control electrical component parts. purchased from Siemens or the similar high quality brands .
  • The electrical motor drive for diesel engine purchased from Bosch.
  • The accumultor for the waterjetting unit from Bosch .
Water blasting machine

Diesel Engine Purchased From Famous Brands ,Watex Also Supply OEM Service

Diesel engineer as one of the most important part like the water jet unit. So all of Watex hydro blasting machine diesel engine purchased from Cummins or same quality brands. you also can tell us the brand of the diesel engine you need, we can supply OEM service .

  •  Cummins engine oil ,every 1000 hours to update
  •  Service network all of the world
  •   Max rotating speed 1900 rpm
  •   Advanced fuel injection technology ,heat efficiency 9.8MJ/KWH
Water blasting machine

304 Stainless Steel Water Tank In 4mm Thickness For Water Jet Blasting Machine

If the water tank made by plastic will break easy and rust easy . Besides, if it made by normal steel and break the pump easy and increase the rating of the blockage

  • 250 gallon water tank.
  • Triple 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
  • While of the water tank made by laser welding
Water blasting machine

High Performance Triple Filter For Water Jet Blasting machine

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
  • Whole of the filter made by laser welding to guarantee the high seal
  • There are three filter layers insider of each cover
Water blasting machine

Smart Fluid End Conversion For Water Jet Blasting Machine With Little Maintenance

  • Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
  • High strongest fluid end
  • Lower maintenance for the fluid end
  • Easy to Change the spare parts for the pump and fluid end
  • All of the HP seal kits made in NOK
Water blasting machine

Max Strongest Chassis For Ultra High Pressure Water Jet Blasting Equipment Guarantee Long Lifespan

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement
  • Whole of the machine chassis made by integrated design
Water blasting machine

Hydraulic Reel Collection System Without Compromise As Option For High Pressure Hose

  • Torsion accessory can improve the working environment and increase the working efficiency. And extend the lifetime of the high pressure tube with water blasting machine
  • All of the high pressure tube /line made in Sweden or USA. Combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
Water blasting machine

Application With Water Blasting Machine for Industry Washing

Ultra high Pressure (UHP) water jet blasting system uses pressure water from 1000bar to 2800bar used to clean the drain. And sewer and tube insider cleaning with 3D cleaning head. it also can be used for paint for oil tank and protective coating removal for ship hull , road marking or zebra crossing removal .

This method is perfect for internal and external surfaces. Because the spray gun operator is able to access those “hard to reach” areas .

Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned.

One of the major differences between high pressure water jet blasting machine. And other cleaning abrasives is the ability to contain, capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning.

Underwater robot ship bottom Cleaning

The purpose of underwater ship wall cleaning is to remove biological roughness or fouling. A build up of marine fouling can lead to increased drag. Resulting in a detrimental impact on a vessel’s hydro dynamic performance and hence the relationship between speed power performance and fuel consumption.

Fouling, particularly in the case of a prolific build-up of hard or shell fouling like barnacles or tubeworm. can cause turbulence, cavitation and noise. frequently affecting the performance of sonars, speed logs and other hull mounted sensors.

Proper cleaning removes all traces of fouling and does not damage the coating or cause any increased surface roughness. Underwater cleaning is performed either by a diver with high pressure cleaning pump or by a remotely operated vehicle (ROV) controlled from land.

Applicability and assumptions with water blasting machine

Hull cleaning is applicable for all vessel types and ages. Depending on the degree and type of fouling to be removed a diver can typically clean 300 to 400 m2 per hour of flat surfaces (less on the bow and stern areas).

It also can combining with crawler robot for big sea ship and boat to remove the old paint in a quick speed . Watex crawler robot also have vaccum system which improving the cleaning efficiency.

The operation will be performed during normal ship stops (bunkering, anchorage). The fuel reductions depend on the extent to which the hull is fouled.

Reduction potential
Depending on the degree of marine fouling, vessel size, vessel segment, operation profile and trading areas a reduction in the range of 1% to 5 % on main engine fuel consumption can be expected.

  • Hydro Blasting Machine For Sale Italy

    Watex hydro blasting machine exported to our client from Italy ,they purchased such hydroblasting machine to cleaning the drilling pipe . They purchased many hydroblaster form German three years ago ,in this year ,they make a decision to choose the machines from us after they know the configuration and workmanship and compare with other suppliers

  • Hydroblasting equipment used in Oman

    Client Mr Zahidi from Oman purched our hydroblasting equipment with 40000 psi for rust and paint removal for the oil tank .

  • UHP Water Jetting Machine For Sale To Austrlia

    Watex D-stream UHP water jetting machine export to Australia ,they purchased our machine for cleaning the insider of the pipe ,there are lots of the cement and chemical material inside and not easy to remove .

  • Water blaster for sale to Iceland

    Watex water blaster machine with 2000 bar and 35L/min export to spain ,they purchased such machine for the surface of the concrete and old concrete cleaning .

  • Watex for Singapore border line project repair

    In 2020, November Watex D-stream UHP water blasting machine took part in the road repair in Singapor, the road company name :CK THK CO ,they purchased our machine for road marking removal for the govement .

  • UHP Water Blasting Machine Used For Paint Removal For Ship Hull In UK

    Watex D-stream28025 hydro blasting machine were used in the birmingham of United Kindon for ship hull ; they purchased the machine for paint removal with the robot panel combining with recycling system to collect the paint and water after cleaning.

  • UHP water blasting machine for sale in Saudi Arabia

    Watex ‘ D-stream28035 UHP water blasters arrived in the port of Jeddah Islamic Port,Saudi Arabia for paint removal, this is the first time that Watex sold ultra high pressure 2800 bar (40600 psi) machine to Saudi Arabia . We have sold some 1400 bar with 110L /min for oil pipe cleaning and 5 sets of 1000 bar with 200L/min for mining cleaning .

  • UHP water jetting system for sale to UK

    UHP water jetting system for sale to Uk .Client Gary fr […]

  • Water blasting machine for sale to client from Swiss

    Water blasting machine made for client from United Kingdom

  • Hydro jetting machine for sale in USA

    Hydro jetting machine for sale in USA , Client Mr Bob p […]

  • What is the hydro blasting ?2024-3-13

    Hydro blasting is the use of high speed streams of high pressure water with different flow rate to cut through almost all solid materials and to clean various surfaces.

  • Hydro blaster machine2024-4-7

    Hydro blaster machine has become more common day by day through ultra high pressure water often replacing the sand blasting. The uses of hydro blaster machine vary from paint and grease removal, tank cleaning and heat exchangers.

  • What is the water Jet cleaning machine ?2024-2-3

    Water jet cleaning machine uses high pressure water take over 10,000 psi to remove grime, loose paint, mud, mold, dust . and other types of stubborn dirt on the surfaces of tanks, buildings, vehicles, streets, bridges, pipes and many more items.

  • What is high pressure water blaster ?2023-6-1

    High pressure water blaster use the water under pressure between 20000-40000psi, is supplied to the nozzle and is ejected as a jet of water against the workpiece. When the water hits the contact surface, any contaminants on the surface layer is blasted away due to the high kinetic energy.

  • Ultra high pressure hydro blaster2024-1-16

    Overview Ultra high pressure hydro blaster is a machine […]

  • Hydro jetting heat exchanger2024-1-10

    Hydro jetting heat exchanger thoroughly and efficiently with high pressure water. Deposits get lodged in the heat exchanger tubing, reducing the efficiency of heat transfer. Any reduction can result in higher expenditures for the operator.

  • Hydro blaster2023-6-1

    Hydro blaster is the cleaning method use high pressure stream of water up to 3000 bar or 40000 psi to achieve the cleaning . It is used to remove old paint, rust, airfield rubber, sugar refinery ,gas and oil industry ,offshore cleaning and heat exchanger jetting.

  • What is hydrodemolition machine ,robot will improve you efficiency ?2023-5-8

    Hydrodemolition is ideal for the removal of concrete without damage or impact to the reinforcement bars .Or vibration of a structure. This process provides an excellent bonding surface for repair material.

error: Content is protected !!