Watex water blaster is engineered to outperform and achieve surface prepration according to clients requirement. It adopts ultra high pressure water to clean the pipe tube cement rust and paint .
Watex diesel high pressure water blaster offer a host of features to provide contractors with enhanced performance, superior durability. We also have trailer in case the machine need to be used in the wild place , just take you car pull it .
D-stream high pressure water blaster deliver a host of engineered improvements. One of the most notable changes is the filter system. Integrated design helps extend system life and keep the high pressure seals of the machine as well .
All of the pressure valve and pressure gauge with snubber are mounted on a separate accessory manifold. Which provides additional protection for these important components.
Powerful performance and undeniable reliability are just two reasons the new high pressure water blaster equipment is the clear choice for your
With operating pressures from 200bar to 3000 bar, it is ideally suited for a wide variety of cleaning work. e.g. in the chemical and mining industry and popular in the paint removal industry for the big ship .
HP sealing made by super composite material enables high durability of the high pressure seals and counteracts the ingress of air.
Ultra high pressure (UHP) washer pump unit
- Three pistons type keep the stability of the running
- Chang various pressures flexible with accelerating speed
- Diesel engine driven pump ensure the fluid end receives water at the correct pressure
With the continous working pressure from 100bar to 3000 bar with different flow rate combing varies cleaning head for tube cleaning with big flow rate and paint rust removal and cement jetting with ultra high pressure .
1) High Pressure Water Blaster Pump Anti Vibration Technology
- High pressure pump anti vibration technology reduces vibration during running by 30% allowing less movement and greater control of the end hose.
- One button stabilization technology quickly dampens any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.
- With cycle times of up to 1900 per minute (at 2800MPa). Pump efficiency is increased up to 25% while diesel consumption is decreased by up to 10%.
- By adopting our new swing brake tech, the pump’s overswing amplitude is reduced by 70%
- The hydraulic system developed by an international team ensures precise operation and energy consumpition
- Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
- Easily accessible service points and a detachable fluid end that make maintenance more easy
Versatile And Easy Control Panel For High Pressure Water Blaster
Control system ensure the high stability of the flow rate and continuous high pressure water blaster. And guarantee high volumetric efficiencies at high pressures in a quick speed as well.
It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%
1) Watex Fault Self Diagostic Technology For High Pressure Water Blaster Machine
Continually monitors more than 20 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.
- Low water lever shutdown system
- Water temperature shutdown system
- Different pressure alarm
- Oil pressure alarm when take it’s limit
- Oil temperature alarm when too high
- Water pressure switch to keep the pressure of the water into the pump is eligible
All Of The Electrical Component Parts Purchased From Schneider or ABB For High Pressure Water Blaster
- All of the electrical components adopts Schneider.
- Some control electrical component parts purchased from Siemens or the similar high quality brands .
- The accumulator for the diesel engine purchased from Bosch
- The motor of for the diesel engine purchased from Bosch
Diesel Engine Purchased From Famous Brands ,Easy To Maintain And Find Afterservice In you Local side
Diesel engineer as one of the most import part like the high pressure pump unit. Watex high pressure water blaster diesel engine purchased from Cummins or same quality brands ,you also can tell us the brand of the diesel engine you need, we can supply OEM service .
- Cummins engine oil ,every 1000 hours to update
- Service network all of the world
- Max rotating speed 1900 rpm
- Advanced fuel injection technology ,heat efficiency 9.8MJ/KWH
304 Stainless Steel Water Tank in 4mm Thickness For Ulra High Pressure Water Blaster
If the water tank made by plastic or normal steel will break and rust easy. As you know rust or corrosion will break the pump easy and increase the rating of the blockage
- 250 gallon water tank.
- Triple 200 gpm filters – the first in its class..
- Water tank with no pressure filter system by Watex design.
- Equipped with low water shutdown system and high temperature stop system.
- Italy mechanical floating valve can eliminate the water hammer effectively
- Allows for water to de-aerate before entering the pump, extending the life of the parts.
- Low water level switch to prevent cavitation from water supply problems
High Performance Triple Filter System For UHP High Pressure Water Blaster
- Three stage filters
- 1μ standard
- 304 stainless steel casting cover bear high pressure
- All of the filter system made by laser welding
- Double filters system insider of each filter tank
- Each filter system have three filter layers
Smart Fluid End Conversion With Lower Maintenance For High Pressure Water Blaster
- Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
- Lower maintence with lower spare parts
- Very easy to change the cumsumable parts
- Special tools for change the HP seal to impove the precision
- All of the high pressure seal made in NOK
Max Strongest Chassis For Ulra High Pressure Water Blaster Guarantee Long lifespan
- Dural independent frame system ,diesel and pump mounted on a separate plate
- Design specially for surface treatment ,easy to transport and hoist
- The plate has tool box can keep some tools and accessories easy and safe
- Galvanized processing to meet the long term anticorrosion requirement
- Whole of the chassis made by integrated milling and welding
Hydraulic Reel Collection System Without Compromise As Option For Long Hose
- Hydraulic reel system improves the working environment and increase the working efficiency.
- Extend the lifetime of the high pressure tube
- All of the high pressure tube made in Sweden or USA.
- Combining the hydraulic system it can collect the long soft tube in a good situation then can be long used
- Maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
Application industry with ultra high pressure water blaster
Ultra high pressure water blaster uses pressure water from 100bar to 2800bar used to clean the drain and sewer and tube insider cleaning with many types of the cleaning heads .
High Pressure water blasting surface preparation is an eco-friendly, efficient, safe, and economical way to clean and preserve various surfaces. It has the advantage that you can prepare and clean a wide range of surface painted on the exterior without using chemicals. It also releasing dangerous toxins to the environment.
It’s different from chemical based cleaning in that no residues are left behind meaning that rinsing isn’t necessary.
Pressure washing equipment gives you the allowance to change the pressure and use rotative nozzles of different sizes depending on the job at hand. For example, if you want to remove contaminants, dust, and cobwebs, you can use low pressure. If you want to get rid of multi-layered coats, adhesive, clean cracks for repairs. It open pores on the surface for better application of a protective coat. Then you need to increase the pressure.
High Pressure washing machine ensures that the surface being prepared is free of chemicals and clean for other uses like coating surface preparation . Improper handling of high pressure cleaning machine can damage and erode the surface being cleaned whether it’s metal or steel. Therefore, industrial painters are required to know how to handle the equipment.
Underwater robot ship bottom cleaning with high pressure water blaster
The purpose of underwater ship wall cleaning is to remove biological roughness or fouling. A build up of marine fouling can lead to increased drag. Resulting in a detrimental impact on a vessel’s hydrodynamic performance and hence the relationship between speed. High performance and fuel consumption. Fouling, particularly in the case of a prolific build-up of hard or shell fouling like barnacles or tubeworm. It can cause turbulence, cavitation and noise, frequently affecting the performance of sonars, speed logs and other hull mounted sensors.
Proper cleaning removes all traces of fouling and does not damage the coating or cause any increased surface roughness. Underwater cleaning is performed either by a diver with high pressure cleaning pump or by a remotely operated vehicle (ROV) controlled from land.
Applicability and assumptions with high pressure water blasting
Hull cleaning is applicable for all vessel types and ages. Depending on the degree and type of fouling to be removed a diver can typically clean 300 to 400 m2 per hour of flat surfaces. The operation will be performed during normal ship stops (bunkering, anchorage) . The fuel reductions depend on the extent to which the hull is fouled.
Reduction potential
Depending on the degree of marine fouling, vessel size, vessel segment. The operation profile and trading areas a reduction in the range of 1% to 5 % on main engine fuel consumption can be expected.
