Aqua blast machine Aqua blast machine

Aqua blast machine

Aqua blast machine is engineered by diesel engine with ultra high pressure water combining with rotative cleaning head to achieve surface cleaning solution in some special circumstance that normal tool can not deal with.

Available with a skid or trailer unit, Watex water jetting equipment offer a host of features to provide contractors with enhanced performance, superior durability.

Over view

Aqua blast machine is engineered by diesel engine with ultra high pressure water combining with rotative cleaning head to achieve surface cleaning solution in some special circumstance that normal tool can not handl which compare with aqua blasting .
It is environmnetal and efficiency tool instead of the traditional cleaning methods . It just use the pure water without any material like sand or abrasive to clean the surface .
Available with a skid or trailer unit. Watex water jetting equipment offer a host of features to provide contractors with enhanced performance, superior durability.
Powerful performance and undeniable reliability are just two reasons the new water jetting equipment is the clear choice for your industry cleaning requirement .
With operating pressures from 1500bar to 3000 bar. It is ideally suited for a wide variety of cleaning work in the chemical and sugar industry and popular in the paint rust removal industry for the big ship .
HP sealing made by super composite material enables high durability of the high pressure seals and counteracts the ingress of air.

Ultra High Pressure aqua blast machine pump unit

Three pistons to Five pistons plunger type keep the stability of the running
 Chang various pressures flexible with accelerating speed within two mins
 Diesel engine driven pump ensure the fluid end receives water at the correct pressure with lower maintenance

With the continous working pressure from 1000bar to 3000 bar with different flow rate combing varies cleaning head for tube cleaning. And adopts big flow rate for aqua blasting paint rust removal and hydrodemolition or heat exchanger with ultra high pressure .

1) Water blasting machine anti vibration technology

Ultra high pressure (UHP ) water jetting machine anti vibration technology reduces vibration during running by 30% allowing less movement and greater control of the end hose and the water jet unit.
One button stabilization technology quickly dampens the water jet pump movement resulting from repositioning the pump concentric running. This allows precise positioning of the end hose.
With cycle times of up to 1900 per minute at 2780 bar with 40000psi. The pump efficiency is increased up to 25% while diesel consumption is decreased by up to 10%.

  • By adopting our new swing brake tech, the pump’s plunger amplitude is reduced by 70%
  •    The water jet blasting system developed by an international team ensures precise operation and energy consumpition
  •    Extra reinforcements in the boom, plunger, plunger and undercarriage increase stability and service life
  • Easily accessible service points and a detachable fluid end that make maintenance more easy
Aqua blast machine

Versatile And Easy Control Panel For Auqa blast machine

Control system ensure the high stability of the flow rate and continuous ultra high pressure water jetting running and guarantee high volumetric efficiencies at high pressures in a quick speed as well.
It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%

1) Watex Fault Self Diagostic Technology For aqua blast machine

Continually inspectiong more than 100 aspects of the waterjetting pump during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.

  • Low water lever shutdown system
  • Water temperature take over shutdown system
  • Different pressure alarm
  • Oil pressure alarm
  • Oil temperature alarm
  • Water pressure switch to keep the pressure of the water into the pump is eligible
Aqua blast machine

All Of The Electrical Component Parts Purchased From Schneider For aqua blasting machine

  • All of the electrical components adopts Schneider and some control electrical component parts .
  • Most of the parts purchased from Siemens or the similar high quality brands .
  • The electrical power supply for the diesel engine from Verta
  • The diesel motor and CPU from Bosch
Aqua blast machine

Diesel Engine Purchased From Famous Brands For aqua blast machine

Diesel engineer as one of the most important part like water jetting pump unit. So all of Watex aqua blasting machine diesel engine purchased from Cummins or same quality brands. You also can tell us the brand of the diesel engine you need, we can supply OEM service .

  • Cummins engine oil ,every 1000 hours to update
  •  Service network all of the world
  •   Max rotating speed 1900 rpm
  •   Advanced fuel injection technology ,heat efficiency 9.8MJ/KWH
Aqua blast machine

304 Stainless Steel Water Tank In 4mm Thickness For aqua jetting equipment

If the water tank made by plastic will be easy break by collision and rust easy if the tank made by steel and break the pump easy and increase the rating of the blockage

  • 250 gallon water tank.
  • Triple 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
Aqua blast machine

High Performance Filter For Ultra High Pressure water blast machine

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
  • Integrated welding for the filte system
  • There are three layers of the filters insider of each cover to confirm the high purity of the water
Aqua blast machine

Smart Fluid End conversion for high pressure aqua blaster machine

  • Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
  • lower consumable parts and easy to supply maintenance
  • Little consumable parts for the fluid end
  • Easy to change the spare parts for water blast machine
  • Whole of the HP seal kits made in Japan
Aqua blast machine

Max strongest chassis For UHP aqua blast machine guarantee long lifespan

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement
  • Whole of the chassis made by integrated welding
Aqua blast machine

Hydraulic collection system without compromise as option for long hose

  • Torsion accessory can improve the working environment and increase the working efficiency and extend the lifetime of the high pressure tube
  • All of the high pressure hose made in Sweden or USA .
  • Combining the hydraulic system it can collect the long soft tube in a good situation during the aqua blasting
  • And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
Aqua blast machine

Application Industry For Ultra High Pressure(UHP) Aqua Blast machine

Ultra high pressure (UHP) water jetting equipment from 100bar to 2800bar used to clean the drain and sewer and tube insider cleaning with 3D cleaning head. it also can be used for paint and rust removal and pipe tube cleaning.
This method is perfect for internal and external surfaces because the spray gun operator is able to access those “hard to reach” areas .

Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned.
One of the major differences between ultra high pressure waterjetting machine and other cleaning abrasives is the ability to contain, capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning.

Underwater robot water blast machine for ship bottom Cleaning

The purpose of underwater ship wall cleaning is to remove biological roughness or fouling. A build up of marine fouling can lead to increased drag, resulting in a detrimental impact on a vessel’s hydrodynamic performance and hence the relationship between speed, power performance and fuel consumption. Fouling, particularly in the case of a prolific build-up of hard or shell fouling like barnacles or tubeworm, can cause turbulence, cavitation and noise, frequently affecting the performance of sonars, speed logs and other hull mounted sensors.

Diver performing underwater ship hull cleaning the alga and barnacle with high pressure water for the bottom of the ship .

Applicability and assumptions with aqua blast machine

Hull cleaning is applicable for all vessel types and ages. Depending on the degree and type of fouling to be removed a diver can typically clean 300 to 400 m2 per hour of flat surfaces (less on the bow and stern areas). The operation will be performed during normal ship stops (bunkering, anchorage) The fuel reductions depend on the extent to which the hull is fouled.

Applicability and assumptions with aqua blasting machine
Depending on the degree of marine fouling, vessel size, vessel segment, operation profile and trading areas a reduction in the range of 1% to 5 % on main engine fuel consumption can be expected.

Proper cleaning removes all traces of fouling and does not damage the coating or cause any increased surface roughness. Underwater cleaning is performed either by a diver with high pressure cleaning pump or by a remotely operated vehicle (ROV) controlled from land.

  • Hydroblasting equipment used in Oman

    Client Mr Zahidi from Oman purched our hydroblasting equipment with 40000 psi for rust and paint removal for the oil tank .

  • Hydro Blasting Machine For Sale Italy

    Watex hydro blasting machine exported to our client from Italy ,they purchased such hydroblasting machine to cleaning the drilling pipe . They purchased many hydroblaster form German three years ago ,in this year ,they make a decision to choose the machines from us after they know the configuration and workmanship and compare with other suppliers

  • UHP Water Jetting Machine For Sale To Austrlia

    Watex D-stream UHP water jetting machine export to Australia ,they purchased our machine for cleaning the insider of the pipe ,there are lots of the cement and chemical material inside and not easy to remove .

  • Water blaster for sale to Iceland

    Watex water blaster machine with 2000 bar and 35L/min export to spain ,they purchased such machine for the surface of the concrete and old concrete cleaning .

  • Water blasting machine for sale to client from Swiss

    Water blasting machine made for client from United Kingdom

  • Watex for Singapore border line project repair

    In 2020, November Watex D-stream UHP water blasting machine took part in the road repair in Singapor, the road company name :CK THK CO ,they purchased our machine for road marking removal for the govement .

  • UHP Water Blasting Machine Used For Paint Removal For Ship Hull In UK

    Watex D-stream28025 hydro blasting machine were used in the birmingham of United Kindon for ship hull ; they purchased the machine for paint removal with the robot panel combining with recycling system to collect the paint and water after cleaning.

  • UHP water blasting machine for sale in Saudi Arabia

    Watex ‘ D-stream28035 UHP water blasters arrived in the port of Jeddah Islamic Port,Saudi Arabia for paint removal, this is the first time that Watex sold ultra high pressure 2800 bar (40600 psi) machine to Saudi Arabia . We have sold some 1400 bar with 110L /min for oil pipe cleaning and 5 sets of 1000 bar with 200L/min for mining cleaning .

  • Water jetting pump2022-6-12

    Water jetting pump is the heart of any high pressure water jetting system, and Watex pumps are designed for maximum performance with minimal wear.

  • Airport runway rubber removal vehicles2022-1-17

    Airport runway rubber removal vehicles is the use of high pressure water to remove the rubber that is left by aircraft tires.

  • Ultra high pressure water blasting equipment2022-9-15

    Ultra high pressure water blasting equipment for challenging industrial cleaning and jetting projects. It is the machine not only cost-effective .it effectively jetting the surface without damage to the existing profile . And with very little impact on the environment with ultra high pressure water blasting machine.

  • Why hydro blasting system ?2022-6-18

    Hydro blasting system we also called hydro blasting unit is a high pressure water cleaning system that uses up to 40000 psi water to remove dirt and chemical material from surfaces.

  • Water jet blaster2022-6-18

    Water jet blaster consists of pump that generates high pressure water , combing with the high pressure hose and rotative cleaning head which can remove mold, grime, dust, mud and dirt from of various objects such as road marking removal, rust removal, old paint removal .

  • What Is The UHP Water Blasting Equipment ?2022-6-18

    UHP water blasting equipment is a technique for cleaning internal and external surfaces, which relies entirely on the sheer force of water from a pressurized source to achieve the desired cleaning. Abrasives, toxic and potentially harmful chemicals are not used in water blast cleaning systems.

  • What is water blasting ?2022-6-18

    Water blasting uses high pressure water to remove loose debris and rust and paint and jetting sewer drain and pipe and tube . UHP water blasting is a technique used for surface preparation. It removes various coatings, contamination, chlorides , and corrosion. Water jetting or hydro blasting has to be done with chloride-free water to remove unwanted materials . and leave the surface ultra-clean.

  • Hydro blaster2022-6-1

    Hydro blaster is the cleaning method use high pressure stream of water up to 3000 bar or 40000 psi to achieve the cleaning . It is used to remove old paint, rust, airfield rubber, sugar refinery ,gas and oil industry ,offshore cleaning and heat exchanger jetting.

error: Content is protected !!