Faqs Faqs
  • What is water blasting ?2024-1-8

    Water blasting uses high pressure water to remove loose debris and rust and paint and jetting sewer drain and pipe and tube . UHP water blasting is a technique used for surface preparation. It removes various coatings, contamination, chlorides , and corrosion. Water jetting or hydro blasting has to be done with chloride-free water to remove unwanted materials . and leave the surface ultra-clean.

  • Airport runway rubber removal vehicles2024-1-6

    Airport runway rubber removal vehicles is the use of high pressure water to remove the rubber that is left by aircraft tires.

  • High pressure water jetting system2024-1-2

    Ultra high pressure (UHP )water jetting system is a machine for surface cleaning that uses water propelled at a high velocity to remove contaminants and other debris by high pressure water .The force of the fast moving water as it hits a material’s surface is powerful enough to remove unwanted layers of old coatings, which in turn prepares the surface for subsequent operations such as applying primers and paints.

  • High pressure water jetting machine2023-6-14

    High pressure water jetting machine for evaporator tube cleaning, condenser tube cleaning, heat exchanger tube Cleaning and various pipe Cleaning applications. Watex offers high pressure water jetting machine ranging from 100 bar to 2800 bar (2000 psi to 40000 psi) pressure.

  • Water blaster machine2023-6-12

    Water blaster machine is a equipment for cleaning external surfaces and the interior of the pipe or tank .It relies entirely on the sheer force of water from a pressurized source to achieve the desired cleaning effect on the intended surface. Abrasives, toxic and harmful chemicals are not used in water blaster equipment

  • Water jetting pump2023-6-12

    Water jetting pump is the heart of any high pressure water jetting system, and Watex pumps are designed for maximum performance with minimal wear.

  • Water blasting road marking removal2023-6-5

    Water blasting road marking removal use high pressure water to clean the old road marking or airport runway rubber ,it do not break the internal material ,just remove the road marking with the pure water by adjust the pressure around 1500 bar -2000 bar .

  • High pressure water jetting pipe cleaning2023-6-4

    Pipe or tube cleaning with high pressure water jetting, also refer to hydro blasting, is a none invasive solution that uses high pressure water to clear pipes or tubes and remove debris and blockages.

  • High pressure water blaster2023-6-1

    High pressure water blaster use the water under pressure between 20000-40000psi, is supplied to the nozzle and is ejected as a jet of water against the workpiece. When the water hits the contact surface, any contaminants on the surface layer is blasted away due to the high kinetic energy.

  • Water jetting rust removal2023-6-1

    Water jetting rust removal use ultra high pressure water to remove various unwanted paints, coatings, rust, and impurities from surface. When blasting onto the workpiece, the pure and chloride free water leaves behind an ultra-clean, rust free surface.

  • High pressure water blasting system2023-4-21

    High pressure water blasting system is a highly pressured stream of water is used to remove old paint. Chemicals or buildup without damaging the original surface.

error: Content is protected !!